July 8, 2026
For Raspberry Pi 4, 3B+, 3B, 2B, and B+ (not included), ZUMspot (not included) or N5BOC Lonestar Board, and 2.4″ Enhanced Nextion screen (included).Case can fit JumboSPOT or N5BOC Lonestar BoardIncludes a 2.4″ Enhanced Nextion screen*Heatsinks and rubber feet includedStainless steel hardwareThe new inner layers have been designed to fit the Pimoroni Fan Shim (not included, available from Pimoroni)*Please note that connecting the Nextion screen to your set-up may require additional soldering of pins or wires not covered in these case instructions.The Nextion Enhanced NX3224K024 is a powerful 2.4″ HMI TFT display, with 16MB Flash data storage space, 1024 byte EEPROM, and 3584 byte RAM:supports built-in RTCsupports save data to Flashsupports GPIOlarger flash capacitylarger CPU clockNotes on fit of Pimoroni Fan Shim (not included)The clearance between the fan shim (not included) and most radio boards is very slim and not all boards will work with the fan shim if there are components or solder points above the fan. The fan shim has been tested to work with the Zumspot versions 0.4, 0.5, 0.6 and MMDVM Duplex as long as there is no previous solder left over from an OLED screen. The fan shim does NOT work with the N5BOC Lonestar Board***Made at our shop in the state of Washington, USA!C4LABS IS DEDICATED TO PROVIDING THE VERY BEST CASES AND CUSTOMER SERVICE IN THE INDUSTRY
Read More
July 8, 2026
Read More
July 8, 2026
The FLM-7-S (Fan-Less Mini) is ODD less version of our fanless chassis. All improvements and refinements made by factory keep this chassis on the top of design and performance. The ultra-efficient heatsink has been paired with four heatpipes for better cooling performance. The high grade aluminum extrusion is finished with a fine sandblast texture and the front USB ports support USB3.0*. Specification: Material: All aluminum, 4mm thick body Available Colors: Silver / Black ? sandblasted and anodized finish Motherboard Support: Mini ITX with CPU on the left. For CPU located on the middle or on the right – you need short pipes and maybe a riser as well. Hard Drive Bays: 1 x 2.5? + 1 x 3.5? or 2.5? (shared bay) Optical Drive Bays: None Front Ports: 2 x USB 2.0 (*USB3.0 Ready, cable sold separately) Expansion Slot: 1 x Low profile expansion card Cooling: 4 Heatpipes ? Max CPU TDP 65W** (55W for AMD) Dimension: 240 x 250 x 100mm (W x D x H) Net Weight: 2.5KG **As with any passive cooling solution, environmental conditions will have an impact on the performance. A TDP of 65W is only recommended when the chassis is placed in a location with adequate air flow, moderate ambient room temperature and with 150W PSU. Normal 0 false false false MicrosoftInternetExplorer4
Read More
July 8, 2026
NOT COMPATIBLE WITH SOCKET AM4!The FLM-8-Black (Fan-Less Mini) is ODD less version of our fanless chassis. All improvements and refinements made by factory keep this chassis on the top of design and performance. The ultra-efficient heatsink has been paired with four heatpipes for better cooling performance. The high grade aluminum extrusion is finished with a fine sandblast texture and the front USB ports support USB3.0*. Specification: Material: All aluminum, 4mm thick body Available Colors: Silver / Black. Sandblasted and anodized finish Motherboard Support: Mini ITX with CPU on the left. For CPU located on the middle or on the right – you need short pipes and maybe a riser as well. Hard Drive Bays: 1 x 2.5? + 1 x 3.5? or 2.5? (shared bay) Optical Drive Bays: One for slot ODD Front Ports: 2 x USB 2.0 (*USB3.0 Ready, cable sold separately) Expansion Slot: 1 x Low profile expansion card Cooling: 4 Heat pipes. Max CPU TDP 65W** (55W for AMD) Cooling set supplied. Dimension: 240 x 250 x 100mm (W x D x H) Net Weight: 2.5KG **As with any passive cooling solution, environmental conditions will have an impact on the performance. A TDP of 65W is only recommended when the chassis is placed in a location with adequate air flow, moderate ambient room temperature and with 150W PSU. Normal 0 false false false MicrosoftInternetExplorer4
Read More
July 8, 2026
NOT COMPATIBLE WITH SOCKET AM4!The FLM-7-B (Fan-Less Mini) is ODD less version of our fanless chassis. All improvements and refinements made by factory keep this chassis on the top of design and performance. The ultra-efficient heatsink has been paired with four heatpipes for better cooling performance. The high grade aluminium extrusion is finished with a fine sandblast texture and the front USB ports support USB3.0*. Specification: Material: All aluminum, 4mm thick body Available Colors: Silver / Black – sandblasted and anodized finish Motherboard Support: Mini ITX with CPU on the left. For CPU located on the middle or on the right – you need short pipes and maybe a riser as well. Hard Drive Bays: 1 x 2.5″ + 1 x 3.5″ or 2.5″ (shared bay) Optical Drive Bays: None Front Ports: 2 x USB 2.0 (*USB3.0 Ready, cable sold separately) Expansion Slot: 1 x Low profile expansion card Cooling: 4 Heatpipes – Max CPU TDP 65W** (55W for AMD) Dimension: 240 x 250 x 100mm (W x D x H) Net Weight: 2.5KG **As with any passive cooling solution, environmental conditions will have an impact on the performance. A TDP of 65W is only recommended when the chassis is placed in a location with adequate air flow, moderate ambient room temperature and with 150W PSU. Normal 0 false false false MicrosoftInternetExplorer4
Read More
July 8, 2026
Not sure how large the hard drive is. Both vga and hdmi Ethernet dub ports speaker ports.
Read More
July 8, 2026
They are all ready for use, with minor wear and dust residue. The outside of each case is 5cm by 4cm, and they do not have any internal prongs or slots to hold SD cards in place. They can be used to hold things like SD cards, smaller CPUs, screws.
Read More
July 8, 2026
The XWORKS X32 is a small form-factor open air computer case that contrasts its near infinitesimal footprint with the boundless performance of the hardware it houses. Included: XWORKS X32 SFF PC Open Air Case with Accessories and PCIe 3.0 Riser Cable – No PC Parts Included.
Read More
July 6, 2026
In great cosmetic and working condition. Only cosmetic flaw is the faux rubber coating on the spoilers/fins started to break down and get sticky like those things tend to do. I use some isopropyl alcohol to get most of it off so its not sticky, but another cleaning would probably get the remainder off easily if you are picky.
Read More
July 5, 2026
Well kept and excellent condition FormD T1 V2.1 Titanium with Aluminum CNC Panels. This was purchased from the Formdt1 website (not ncase) Included: -Titanum Case V2.1 with Aluminum CNC panels -PCIE 3.0 Riser (brand new/unused) -Front Panel USB C connector -Vertical Stand -4080/4090 travel kit -SF750 (type-4) PSU and 12VHPWR 16pin Cable -Side Radiator/fan mounting kit -Carrying Handle -T1 Fittings Pack Case has been well kept. I moved onto a new case and no longer need, but it was well taken care of when used. Looking to sell to someone who will enjoy it as much as I have. Case comes in original packaging. Comes with brand new and unused PCIE 3.0 riser cable.
Read More