Compact Raspberry Pi Zero and Orange Pi Zero 2W, Protective Case with a premium carbon fiber look for less. All ports are accessible, and punch-out openings for RPIOs and a heatsink. Series Compact Raspberry Pi Zero Protective Case.
Read MoreIntroducing the 30 Piece 3D Printed Motherboard Stands, perfect for keeping your motherboards organized. You can stack up to 4 motherboard for compact storage without the boards rubbing together, or damaging parts in storage. Use with one motherboard to make a simple bench testing rig. Included are short stands for securing the top or bottom of a stack and 24 long stands. ‼️‼️Motherboards NOT included‼️‼️
Read More50mm to 60mm fan adapter plate. Let’s you mount a 20mm fan in a fan slot that can only fit a 60mm fan. Comes with the 8 screws you’ll need; really easy just screw your 50mm fan to the plate and then the plate to the case. Fits standard 50mm fans and 60mm slots. Will almost certainly fit unless you have a really strange fan; if in doubt refer to the technical drawing and measure your fan & fan slot. Unlike other adapters, this design completely fills in the frame around the smaller 50mm fan so the case is still sealed to air afterwards and your fan works as efficiently as possible providing airflow. If you need an adapter for other sizes to other sizes let me know and I can design one for you. Note, picture of white adapter in use in the case are of the 92mm to 120mm version – picture just to show you what the white looks like ONLY ONE ADAPTER AND EIGHT (8) SCREWS INCLUDED.
Read MoreDuct that lets you mount a larger 120mm fan to a 40mm fan slot with a 90 degree corner turn so that you can get away form the 40mm fan slot to have space for the 120mm fan. Get way better cooling with less noise using a larger fan than originally intended. Ideal for using passively-cooled server GPUs in normal computer cases. OR cool your solar inverter way better than whatever small fan it had on before. Please look at technical drawing for exact dimensions. Comes with duct, 4 M5 self-tapping screws for the 120mm fan, and 4 M3 6mm bolts for the mount on 40mm side. All mounting holes are M4.
Read MoreAdapter plate intended for replacing the stock 80mm fan and mounting a larger, better, and quieter 92mm fan onto the popular Dell 089R8J heatsinks found throughout the Optiplex line and also in some HP models. This adapter smoothly reduces the larger 92mm fan’s airflow to the heatsink’s 80mm circle. Comes with the 4 screws you’ll need; really easy use the included M5 screws to mount the 92mm fan and then use the small screws the heatsink comes with to mount the bracket+fan to the heatsink. Finally, tighten down the heatsink to the CPU. Fits standard 92mm fans.Will almost certainly fit unless you have a really strange fan; if in doubt refer to the technical drawing and measure your fan & fan slot. ASK ME QUESTIONS IF YOU’RE NOT SURE! YOU WILL NEED 10mm clearance (about 1/3′)’ above beyond where the 80mm fan sits now. You almost certainly have it in the Dell or HP case, but please check. This design smoothly enlarges/shrinks between the 80mm and 92mm sizes and has good plenum volume for optimal airflow. Unlike other adapters, this design completely fills in the frame around the larger fan so everything is still sealed airtight afterwards and your fan works as efficiently as possible providing airflow. If you need an adapter for other sizes to other sizes let me know and I can design one for you. ONLY ONE ADAPTER AND FOUR (4) SCREWS INCLUDED.
Read MoreYou will need the original bolts that held the original fan to mount the bracket onto the heatsink. You will need 4 M3 bolts of sufficient length for your 40mm fan and 4 M3 nuts.
Read MoreThis angled PC fan bracket was designed specifically for the Phanteks NV series of computer cases, to help direct airflow from the 3 vertically-mounted intake fans and single bottom-mounted intake fan further into the case to better cool your system components.
Read More