Fan Power Takeoff Cable Used to break off the 3 Pin Fan Wire. From Standard Four Pin Large Molex Drive Connectors. RPM Data Line (yellow) is dropped from Fan Signal. Red and Black Supply Standard 12v to CPU Fans.
Read MorePlastic Standoffs 100 Pack. Standard Motherboard Standoffs. Motherboard Plastic standoffs are used to separate the main circuit board from the metal case. Plastic snap in units push through the main board and slide into Case attachment slots. This part is the most common variety plastic motherboard standoffs used. Originated on the IBM AT Systems. Sometimes called Motherboard Spacers. Includes Large Bag of 100 Regular Standoffs used for holes on MB Case Mounting Plate. These quality nylon motherboard standoffs provide the perfect solution for preventing your motherboard from shorting. By elevating the motherboard off the case, these standoffs give support and prevent it from moving around, which can damage vital components. Specifications Dimensions: .75″ (H)x .25″ (W) .25″ (D). Material: Nylon Similar Part Numbers: Cables Unlimited: CON-5700 Jameco:291961 ACBS-6 ROHS
Read MoreA back plate slot cover 1U Mini Size with a Single DB25 hole cut in it. This plate is used to hold one DB-25 serial ports. Primarly used in 1U Rack Mounted Computer Case Slots.
Read MoreA back plate slot cover 1U Mini Size with a Single DB25 hole cut in it. This plate is used to hold one DB-25 serial ports. Primarly used in 1U Rack Mounted Computer Case Slots.
Read MoreA back plate slot cover 1U Mini Size with a Single DB25 hole cut in it. This plate is used to hold one DB-25 serial ports. Primarly used in 1U Rack Mounted Computer Case Slots.
Read MoreA back plate slot cover 1U Mini Size with a Single DB25 hole cut in it. This plate is used to hold one DB-25 serial ports. Primarly used in 1U Rack Mounted Computer Case Slots.
Read MoreA back plate slot cover 1U Mini Size with a Single DB25 hole cut in it. This plate is used to hold one DB-25 serial ports. Primarly used in 1U Rack Mounted Computer Case Slots.
Read MoreA back plate slot cover with a db25 hole cut in it. This plate is used to hold DB-25 serial port or DB-25 Female Parallel port. Some people call these case brackets.
Read MoreA back plate slot cover with a db25 hole cut in it. This plate is used to hold DB-25 serial port or DB-25 Female Parallel port. Some people call these case brackets.
Read MoreA 16 Inch Ribbon cable with one end db-25 Female and the other IDC 26 pin Female. Pin Configuration for 25-Pin Parallel Port Connector 25-PIN PARALLEL PORT CONNECTOR (DB-25 female connector) 26-PIN HEADER IDC on motherboard 1 -Strobe 1 -LP_STB 2 +Data Bit 0 3 LP_D0 3 +Data Bit 1 5 LP_D1 4 +Data Bit 2 7 LP_D2 5 +Data Bit 3 9 LP_D3 6 +Data Bit 4 11 LP_D4 7 +Data Bit 5 13 LP_D5 8 +Data Bit 6 15 LP_D6 9 +Data Bit 7 17 LP_D7 10 -Acknowledge 19 -LP_ACK 11 +Busy 21 LP_BUSY 12 +Paper End 23 LP_PE 13 +Select 25 LP-SLCT 14 -Auto Feed 2 -LP_AFD 15 -Error 4 -LP_ERR 16 -Initialize Printer 6 -LP_INIT 17 -Select Input 8 -LP_SLIN 18 -Data Bit 0 Return (GND) 10 -GND 19 -Data Bit 1 Return (GND) 12 -GND 20 -Data Bit 2 Return (GND) 14 -GND 21 -Data Bit 3 Return (GND) 16 -GND 22 -Data Bit 4 Return (GND) 18 -GND 23 -Data Bit 5 Return (GND) 20 -GND 24 -Data Bit 6 Return (GND) 22 -GND 25 -Data Bit 7 Return (GND) 24 -GND 26 no connection
Read More