Parallel (IEEE 1284) – PCCP Membership

PCPartner MVP3BS7-954 (35-8954-00-xx) Super-7 Motherboard /w Pentium 200Mhz MMX

July 8, 2026

This is the shortest Baby AT Motherboard you can find, as it’s 7.5″ deep (normally it’s 13.04″ deep). The width is 8.57″. This is one of the smallest, high density AT motherboard you can find that takes the latest processors of the Socket 7 form factor. This unit comes with Pentium MMX 200Mhz but it supported higher processors (up to 100Mhz FSB) through Super-7 socket (which is downward compatible with Socket 7 and Socket 5) It also have dual EDO and SD-RAM slots and also support dual AT and ATX power supply connectors. I can send you the electronic copy of the drivers from Processor• ZIP socket 7.• Support 66, 75, 83, 95 & 100MHz bus clock.• Supports Pentium® and Pentium MMX processors.• Support Cyrix®/IBM® 6×86/6x86L/6x86MX/M-II processors.• Support AMD® K5/K6/K6-2/K6-III processors.• Support IDT® WinChip C6 processors. Cache• Direct-mapped L2 write-back cache.• Supports 512KB on board synchronous pipelined burst SRAM. Two 72-pin SIMM socket• Supports Fast Page Mode (FPM), Extended Data Output(EDO) at 60 or 70ns speed.• Memory size from 8MB to 128MB.• Supports single-density SIMMs of 1MB, 2MB, 4MB and 8MB depth(x32 or 36).• Supports double-density SIMMs of 2MB, 4MB, 8MB and 16MB depth(x32 or 36). Two 168-pin DIMM socket• Supports 3.3V Extended Data Output(EDO) DRAM at 50 and 60ns speeds.• Memory size up to 256MB.• Supports single-density DIMMs of 1MB, 2MB, 4MB, 8MB and 16MB depth (x64 or72).• Supports double-density DIMMs of 2MB, 4MB, 8MB, 16MB and 32MB depth (x64 or 72).• Banks of different DRAM types and depths can be mixed.On-Board I/O• Two PCI fast IDE ports supporting up to 4 ATA2, Ultra DMA33 IDE HDDs, CD-ROMs, ZIP and LS-120 drives as boot devices.• Supports bus master IDE, PIO mode 4(up to 22MB/sec) and Ultra DMA33 (up to 33MB/sec) transfer.• One ECP/EPP parallel port.• Two 16550-compatible UART serial ports.• One floppy port supporting two FDDs of 360KB, 720KB, 1.2M, 1.44M or 2.88M formatted capacity.• Two USB ports(via a header).• One standard AT keyboard port(factory option for PS/2 type).• PS/2 mouse port(via a header).• Infrared (IrDA) support (via a header). Plug-and-Play• Supports plug-and-play specification 1.1a.• Plug-and-play for DOS, Windows® 3.X as well as Windows® 9X.• Fully steerable PCI interrupts. Power Management• Supports SMM, APM and ACPI.• Break switch for instant suspend/resume on system operation.• Energy star “Green PC” compliant. Expansion Slots• 1 AGP slot (ver. 1.0, 1x/2x mode supported).• 3 PCI bus master slots (rev. 2.1 compliant, 1 PCI slot sharing with 1 ISA slot).• 2 ISA slots (1 ISA slot sharing with 1 PCI slot).

PCPartner MVP3BS7-954 (35-8954-00-xx) Super-7 Motherboard /w Pentium 200Mhz MMX

July 8, 2026

This is the shortest Baby AT Motherboard you can find, as it’s 7.5″ deep (normally it’s 13.04″ deep). The width is 8.57″. This is one of the smallest, high density AT motherboard you can find that takes the latest processors of the Socket 7 form factor. This unit comes with Pentium MMX 200Mhz but it supported higher processors (up to 100Mhz FSB) through Super-7 socket (which is downward compatible with Socket 7 and Socket 5) It also have dual EDO and SD-RAM slots and also support dual AT and ATX power supply connectors. I can send you the electronic copy of the drivers from Processor• ZIP socket 7.• Support 66, 75, 83, 95 & 100MHz bus clock.• Supports Pentium® and Pentium MMX processors.• Support Cyrix®/IBM® 6×86/6x86L/6x86MX/M-II processors.• Support AMD® K5/K6/K6-2/K6-III processors.• Support IDT® WinChip C6 processors. Cache• Direct-mapped L2 write-back cache.• Supports 512KB on board synchronous pipelined burst SRAM. Two 72-pin SIMM socket• Supports Fast Page Mode (FPM), Extended Data Output(EDO) at 60 or 70ns speed.• Memory size from 8MB to 128MB.• Supports single-density SIMMs of 1MB, 2MB, 4MB and 8MB depth(x32 or 36).• Supports double-density SIMMs of 2MB, 4MB, 8MB and 16MB depth(x32 or 36). Two 168-pin DIMM socket• Supports 3.3V Extended Data Output(EDO) DRAM at 50 and 60ns speeds.• Memory size up to 256MB.• Supports single-density DIMMs of 1MB, 2MB, 4MB, 8MB and 16MB depth (x64 or72).• Supports double-density DIMMs of 2MB, 4MB, 8MB, 16MB and 32MB depth (x64 or 72).• Banks of different DRAM types and depths can be mixed.On-Board I/O• Two PCI fast IDE ports supporting up to 4 ATA2, Ultra DMA33 IDE HDDs, CD-ROMs, ZIP and LS-120 drives as boot devices.• Supports bus master IDE, PIO mode 4(up to 22MB/sec) and Ultra DMA33 (up to 33MB/sec) transfer.• One ECP/EPP parallel port.• Two 16550-compatible UART serial ports.• One floppy port supporting two FDDs of 360KB, 720KB, 1.2M, 1.44M or 2.88M formatted capacity.• Two USB ports(via a header).• One standard AT keyboard port(factory option for PS/2 type).• PS/2 mouse port(via a header).• Infrared (IrDA) support (via a header). Plug-and-Play• Supports plug-and-play specification 1.1a.• Plug-and-play for DOS, Windows® 3.X as well as Windows® 9X.• Fully steerable PCI interrupts. Power Management• Supports SMM, APM and ACPI.• Break switch for instant suspend/resume on system operation.• Energy star “Green PC” compliant. Expansion Slots• 1 AGP slot (ver. 1.0, 1x/2x mode supported).• 3 PCI bus master slots (rev. 2.1 compliant, 1 PCI slot sharing with 1 ISA slot).• 2 ISA slots (1 ISA slot sharing with 1 PCI slot).

Dell PCI-e Expansion Card 05R3FC Serial RS-232 (DB9) Parallel LPT (DB25) Ports

July 6, 2026

Part Number: 05R3FC. Card features a RS-232 (DB9) serial port and a Parallel LPT (DB25) port. Dell PCI-e Expansion Card. This card was pulled from a decommissioned computer system in good working order.