84A Malakas Street Pinyahan, Diliman Quezon City, Philippines Mon – Fri: 9:00 – 18:00

Item Tag: Parallel Cards

DB25 Parallel Port IEEE 1284 Printer PCI Controller Card Adapter 25 Pin LinuxCNC

July 1, 2026

PCI parallel port suitable for LinuxCNC or other parallel port application. No drivers are included, drivers are available for download from our website:sector67 DOT org /temp/ebay/ParallelDrivers/There are also many drivers available online for the CH350 chipset that may be suitable for you. DRIVERS ARE UNSIGNED!!! They will not work in Windows unless you disable driver signing and use the drivers unsigned. Please do not buy this card if you want to use it with Windows and you aren’t familiar with Windows configuration, it WILL NOT WORK WITHOUT CONFIGURATION IN WINDOWS! We’ve sold hundreds of these – the cards work fine and they’re parallel port cards but serial drivers are also available so make sure you’ve installed the correct drivers for your application. Did I mention the drivers aren’t signed so this won’t work in Windows without configuration? It’s a <$5 parallel port card, you're not paying enough to get signed drivers. Customer Feedback left: Fast shipping, item as represented.100% satisfied. No problems.Nice product and good service! A+ Product was as described. A++++ Excellent – (Yaay LinuxCNC)Fast shipping, item as represented. Absolutely amazing delivery and price. I feel I should pay more.Worked with LinuxCNC (Debian Buster) had to change the .hal file parallel port from "0" to the correct addressLinux may report this card as a serial port, it will run as a parallel port *OR* a serial port depending on what mode the OS is using the card. Ultimately it's a generic PCI to logic level IO so it can be anything:1 parallel1 serial1 parallel / 1 serial2 serial1 parallel / 2 serial4 serial1 parallel / 4 serial6 serial8 serial 16 serialIf you take a look in the drivers directory provided above you'll see a variety of configurations, ie: 2S1P = 2 serial 1 parallel If you treat it as a parallel port and wire output as a parallel port for LinuxCNC it will run as a parallel port. You have to make sure your hal config has the right port as a target though!

Read More

Vantec 1-Port Parallel PCIe Host Card

July 1, 2026

Vantec 1-Port Parallel PCIe Host Card This UGT-PCE10PL is part of a series of I/O card based on the PCI Express technology. It offers ONE LPT port that enables the user to connect parallel devices. The Parallel (LPT) port offer data transfer rate up to 1.5 Mbps with built-in ECP/EPP/SPP/BPP auto switching operation modes to give you maximum system performance and efficiency via DB25 pin female connector. This card is the best solution for your Centronics peripherals. The UGT-PCE10PL is design to be easy and simple to use for commercial, office and home use. This card is designed to meet PCI Express Specification and with the standard or low profile brackets can be installed virtually in any PC with all major operating systems. The I/O address and IRQ are automatically configured to simplify the installation at the same time offers a reliable and high performance solution for Parallel Communication. Compliant with PCI Express Specification 1.1Supports x1, x4, x8, x16 PCI Express BusAdd one IEEE 1284 Parallel Port on systemSupports Standard Parallel Port (SPP), Enhanced Parallel (EPP) & Enhanced Capability Port (ECP)Faster data rates up to 1.5Mbytes/secPlug-n-Play, I/O address and IRQ assigned by BIOS Specifications: Model: UGT-PCE10PL BUS Type: PCIe Ports: 1 Parallel Ports (DB25 Female) Dimension: 73 x 60 x 18mm System Requirements: Windows XP/Vista/7/8/10 (32/64 bit) One available PCI Express slot What’s included: 1 x 1-Port Parallel PCIe Host Card 1 x Driver CD 1 x User Manual 1 x Low Profile Brackets

Read More