July 9, 2026
We are closed on Saturdays and Sundays. Titan TTC-NK35TZ/RPW/V3 Silent Universal CPU Cooler with High Performance Copper Heat-pipe & Oversize 95mm Cooling Fan Supports Intel Socket LGA 775/1156/1366 AMD AM2/AM3 ….(see list below) A copper base with copper heat-pipes perfect heat conductivity and thermal dissipationPush pin designPWM intelligent controller provides a wonderful balance between performance and rumble generated from CPU Supported CPU List: AMD Socket: AM2/AM2+/AM3/940/939/754/K8 Second Generation Opteron up to ~ 1222 SE / 1222 Third Generation Opteron up to ~ 1356 Athlon 64 up to ~ 4000+/LE-1620 Athlong 64FX up to ~FX-74 Athlon64 x2 up to ~ 6400+/BE 2400/4850e AMD Phenom X 3 up to ~ 8750 AMD Phenom X 4 up to ~ 9950 Sempron up to 3800+/LE-1250 For Intel LGA 775/1156/1366 Core2 Duo up to ~ E8600 Core2 Extreme up to ~ QX9770/X6800 Core2 Quad up to ~ Q9650 Pentium D up to ~ 960 Pentium Dual Core up to ~ E6500K Pentium Extreme up to ~ 965 Pentium 4 up to ~ 672 Pentium 4 Extreme up to ~ 3.73 Ghz Celeron up to ~ 365 Core i7 Processor Extreme Edition up to ~ i7-975 Core i7 Processor up to i7-920 ~ i7-940 Core i5-750 Core i7 Processor up to 860 ~ 870 Noise level: < 12 ~ 31dBA Specifications: Outline Dimension: 86mm x 105mm x 144 mmFan Dimension: 95 x 95 x 25 mmRated Voltage: 12V DCRated Current: 0.24APower Consumption: 2.88WRated Speed: 900-2800 +-10% RPMAirflow: 17.34-49.37 CFMStatic Pressure: 0.01~0.1 InchH₂ONoise Level: <12~31 dBAConnector: 4-PINBearing Type: Z-AXISLife Time: 60,000 HoursTDP: UP TO 140W Store Policy & About us (More on Shipping/ Return Policy / None-USA International Customers)
Read More
July 7, 2026
Supports Motherboard Socket: AM5 / AM4 (Requires Mounting Bracket – Not Included) / FM2 / FM1 / AM3 / AM2 / 1207 / 940 / 939 / 754Aluminum heatsink with copper core base & built-in copper heatpipesPre-applied thermal paste95mm fanRGB & USB header cable included for programmable RGB LED effect with compatible motherboardsSwitchable Fan Speed From 3000 RPM To 3600 RPM Maximum Rotational Speed4-pin PWM power connector for fan power & standard RGB LED lighting (9-inch length, approximate)12V DC
Read More
July 7, 2026
We are closed on Saturdays and Sundays. HIGH POWER® BlueAM4 High Performance Heat-sink with Blue 12x LEDs Cooling Fan for AMD Ryzen 5/ 7/ 9 Socket AM4/ AM5 Processors *** Bundled with a matching thermal pad for a fast and clean installation — no more getting your finger dirty with thermal grease *** Looking to keep your PC cool in style? Look no further! The BlueAM4 CPU Cooler not only delivers top-notch performance but also adds a touch of flair to your setup. Say goodbye to overheating and hello to endless gaming sessions with this reliable and affordable cooler! Advantage over stock AMD fan: 1. Blue LED illumination vs just a dull black fan 2. Secure 4-screw mount vs less reliable clip-on mount Features: 95mm fan with twelve (12) Blue LEDs built-in to the center axle to illuminate toward fan bladesLow Noise (16-28dB) Air-Cool with 4-pin PWM Power Connector, 500-2000 RPM Variable-Speed Motherboard (BIOS) Software ControlledSecure Screw-Mount Direct to Gaming PC Motherboard’s Back-plate, Replacing the Stock Plastic Clip-on Retention BracketsTDP: 75W. Compatible with AMD Ryzen 5 / 7 / 9 CPU, Socket AM4/ AM5 processors.Thermal Pad includedBackward Compatible with 3-pin Fan Header Desktop Computer Mainboard. Height from Processor Contact to Top of the Fan: 52mmFCC, CE, and RoHS Compliance Designed to support AMD Ryzen 5 / 7 / 9 processors and compatible with any socket AM4 AM5 motherboard HIGH POWER® BlueAM4 AMD CPU Cooler operates in low noise that the blue LED light illumination not only is needed to show you the fan is operating, but provides your system an invigorating glow inside. Set your BIOS to silent mode will enable the fan to start spinning at around 500 RPM when it would be amazingly quiet. Noise level remains to be acceptably low during normal system operation. Technical Specifications: Fan Dimensions: 95*95*25mm Fan Rated Voltage: DC 12V Fan Rated Current: 0.20A Fan Speed: 500-2000 R.P.M.±10% (Duty cycle 20%: 500 RPM; 100% 2000 RPM) Bearing Type: Hydraulic Air Flow: 9.0 – 44 CFM ±10% Noise Level: 16 – 28dB (A) ±10% Connector : 2510-4PIN PWM Heat-sink Material: Aluminum Height from processor contact to top of the fan: 52mm Store Policy & About us (More on Shipping/ Return Policy / None-USA International Customers)
Read More
July 7, 2026
HIGH POWER ®BlueAM4. AMD Ryzen 5/ 7/ 9 Socket AM4 Processors. Designed to support AMD Ryzen 5 / 7 / 9 processors and compatible with any socket AM4 AM5 motherboard. Compatible with AMD Ryzen 5 / 7 / 9 CPU, Socket AM4 processors.
Read More
July 7, 2026
HIGH POWER® BlueAM4 CPU Heat-sink/Cooling Fan with 12 Blue LEDs for AMD Ryzen 5/ 7/ 9 Socket AM4 AM5 Processors HIGH POWER® BlueAM4 AMD CPU Cooler operates in low noise that the blue LED light illumination not only is needed to show you the fan is operating, but provides your system an invigorating glow inside. Set your BIOS to silent mode will enable the fan to start spinning at around 500 RPM when it would be amazingly quiet. Noise level remains to be acceptably low during normal system operation. Advantage over stock AMD fan: 1. Blue LED illumination vs just a dull black fan 2. Secure 4-screw mount vs less reliable clip-on mount Features: 95mm fan with twelve (12) Blue LEDs built-in to the center axle to illuminate toward fan bladesLow Noise (16-28dB) Air-Cool with 4-pin PWM Power Connector, 500-2000 RPM Variable-Speed Motherboard (BIOS) Software ControlledSecure Screw-Mount Direct to Gaming PC Motherboard’s Back-plate, Replacing the Stock Plastic Clip-on Retention BracketsTDP: 75W. Compatible with AMD Ryzen 5 / 7 / 9 CPU, Socket AM4 processors.High Performance Thermal Grease Bag Included to Allow Liberal Application on Top of the CPUBackward Compatible with 3-pin Fan Header Desktop Computer Mainboard. Height from Processor Contact to Top of the Fan: 52mmFCC, CE, and RoHS Compliance Technical Details: Fan Dimensions: 95*95*25mm Fan Rated Voltage: DC 12V Fan Rated Current: 0.20A Fan Speed: 500-2000R.P.M.±10% (Duty cycle 20%: 500 RPM; 100% 2000 RPM) Bearing Type: Hydraulic Air Flow: 9.0 – 44 CFM ±10% Noise Level: 16 – 28dB (A) ±10% Connector : 2510-4PIN PWM Heat-sink Material: Aluminum Height from processor contact to top of the fan: 52mm Bonus: 4pcs new factory sealed SATA III 6Gb/s data cables Actual eBay Buyer’s Feedback left for this product: got it, fast shipping…………. Buyer id: donovan_ibg Store Policy & About us
Read More
July 5, 2026
Custom 3D Printed Raspberry Pi 5 Case for Pimoroni NVMe Base – Includes Silicone Bumper Pads Elevate your Raspberry Pi 5 setup with this expertly designed, custom 3D-printed case tailored specifically for the Pimoroni NVMe Base. Perfect for tech enthusiasts and DIY project builders, this case enhances functionality and adds a sleek, modern touch to your device. Key Features:Tailored Fit for Pimoroni NVMe Base: Designed with precision to ensure a perfect fit for your Raspberry Pi 5 when using the Pimoroni NVMe Base, providing excellent protection and enhanced aesthetics.High-Quality 3D Printing: Constructed using premium PLA filament, known for its strength and eco-friendliness. The material ensures durability and a smooth finish that stands out.Heat Management: Thoughtfully designed vents allow optimal airflow, keeping your Raspberry Pi 5 cool during intensive operations, ensuring performance and longevity.Enhanced Protection: Comes with four 8mm x 2mm silicone bumper pads. These pads help absorb shocks and vibrations and prevent slippage, keeping your device securely positioned.Easy Access to Ports: The case design includes precise cutouts for all standard ports, ensuring easy access without removing the case. This makes it ideal for hassle-free connections.Color Options: Available in various colors to match your personal style or decor. Please specify your color choice at checkout. Additional Information:Eco-Friendly Material: Made with biodegradable PLA filament, promoting environmentally responsible tech customization.Hand-Inspected Quality: Each case is individually printed and inspected to ensure top-notch quality and customer satisfaction. What’s Included:1 x Custom 3D-Printed Case for Raspberry Pi 5 and Pimoroni NVMe Base4 x Silicone Bumper Pads1 x Power Button Specifications:Material: Made with biodegradable PLA filament, promoting environmentally responsible productionColor Options: Black, Red, White, or any combination of two colors for the top and bottom piecesDimensions: 95mm length x 64mm width x 32mm height (3.74 inches x 2.52 inches x 1.26 inches)Weight: 2 ounces Color Customization:Choose from black, red, or white.Mix and match top and bottom pieces in different colors for a personalized look. 3D Printing Information:Disclaimer: This model is 3D printed, which means there may be some minor imperfections or layer lines visible. These are natural characteristics of 3D printing and do not affect the overall quality or durability of the model. Why Choose Us?Expert Design: Designed by a Raspberry Pi enthusiast with attention to detail and functionality.Quality Craftsmanship: Produced using state-of-the-art 3D printing technology for precision and durability.Environmental Responsibility: Made with biodegradable PLA filament to promote eco-friendly practices. Order Now and Enhance Your Raspberry Pi 5 Setup with the Perfect Case for Your Pimoroni NVMe Base!Tags Raspberry Pi Case, 3D Printed Case, Raspberry Pi 5, Pimoroni NVMe Base, Custom Raspberry Pi Enclosure, Pi 5 Case, NVMe SSD Case, Portable Computing, DIY Electronics, Pi 5 Accessories, Eco-Friendly, Biodegradable PLA
Read More
July 5, 2026
CoolerOne 95mm 4-pin PWM Fan. fan for Titan TTC-NK35TZ/RPW/V3 CPU Cooler. Rated Current: 0.20A.
Read More
July 5, 2026
The product is a 95mm dual-fan cooler designed specifically for XFX RX580 584 588 graphics cards. Made in China, this fan is a crucial component for maintaining optimal temperature levels during intense gaming or graphics-intensive tasks.
Read More