SUNON EF35070SX-C01C-A99 5V 1.15W 7800RPM 25.8dBA 3507 3.5CM blower fan
At our warehouse.
Read MoreAt our warehouse.
Read More1 Piece -DC Fan 2 pin. Fan speed: 9500±10%rpm. Rated current: 0.2±10% Amp. Noise:23±10%dBA.
Read MorePackage Includes 2 Pieces – DC Fan 2 pin 35mm×35mm×10mm 5v Size:35x35x10mmConnector:XP2.0-2PRated current: 0.2±10% AmpRated voltage:DC:5VBearing Type: SleeveNoise:23±10%dBAFan speed: 9500±10%rpmAirflow:4.98CFMWeight: 10g/pcsCable Lenght: 13cmLife: 35000 hours
Read MorePackage Includes 3 Pieces – DC Fan 2 pin 35mm×35mm×10mm 5v —————————————————Size:35x35x10mmConnector:XP2.0-2PRated current: 0.2±10% AmpRated voltage:DC:5VBearing Type: SleeveNoise:23±10%dBAFan speed: 9500±10%rpmAirflow:4.98CFMWeight: 10g/pcsCable Lenght: 13cmLife: 35000 hours———————————————————-
Read MorePackage Includes 1 Piece – DC Fan 2 pin 35mm×35mm×10mm 5v With USB plug —————————————————Size:35x35x10mmConnector:USBRated current: 0.2±10% AmpRated voltage:DC:5VBearing Type: SleeveNoise:23±10%dBAFan speed: 9500±10%rpmAirflow:4.98CFMWeight: 10g/pcsCable Lenght: 13cmLife: 35000 hours———————————————————-
Read More35mm×35mm×10mm 5v. 4 Pieces -DC Fan 2 pin. Fan speed: 9500±10%rpm. Noise:23±10%dBA.
Read MorePackage Includes 2 Pieces – DC Fan 2 pin 35mm×35mm×10mm 5v —————————————————Size:35x35x10mmConnector:XP2.0-2PRated current: 0.2±10% AmpRated voltage:DC:5VBearing Type: SleeveNoise:23±10%dBAFan speed: 9500±10%rpmAirflow:4.98CFMWeight: 10g/pcsCable Lenght: 13cmLife: 35000 hours———————————————————-
Read MoreIt can also be used to take power from ESC.The plug is not divided into positive and negative poles, and you don’ worry the wrong connection will not work. Size: 25mm. Compatible Devices: 1/10 1/8 1/12 RC Car.
Read MoreSpecifications: Description: Use heatsink adhesive glue to install heatsink .Glue is not included here. Please check the specification table and make sure that the size of the heatsink fits that of your component.
Read MoreModel: OC-H09D Traffic: 12 L/MIN Head: 6±0.5M Working voltage: DC12V/24V Noise: ≤35DB Color: Black Material: POM+ Acrylic + Aluminum alloy Bearing: Ceramic Inlet/Outlet: G1/4 thread Sealing: ≧ 0.2mpa Power interface: Big 4-PIN Rated power: 16W Note to buyers: 1. When filling the liquid, it is necessary to start the pump power repeatedly for several times. This operation helps to drive the liquid into the loop and expel the air. 2. Do not idle the pump! If there is no liquid, turn off the pump power immediately to avoid damage to the pump. 3. After the liquid is added, please open the interface screw above the reservoir, and let the water cooling loop continue to circulate for 24 hours, so that the gas can effectively discharge from the water cooling system.
Read More